Bang & Olufsen BeoCom 1 - User Guide - Manual (Page 12)

12
>> Get started
Phone feedback – indicator lights
Indicator light on the handset
The indicator light flashes red when…
– The phone is off the hook
– The phone rings
– Unanswered Caller IDs are registered. If you set a primary line for
outgoing calls, as described on page 36, the indicator light flashes for
unanswered calls on the primary line only. Otherwise, the indicator light
flashes for all unanswered calls
– Conditions exist which affect or impede the optimal use of your phone.
Refer to page 15 for more information.
Connect and use a headset
Connect a headset to the socket on the handset as shown. You can
then answer incoming calls by pressing or any digit key on the
handset keypad. Place a call as described on page 20.
An optional headset can be purchased from your Bang & Olufsen retailer.
You can turn off the handset
indication of unanswered Caller
IDs. Refer to the chapter Preference
settings on page 53 for more
information.
Indicator
light
When you connect a headset,
‘Headset connected’ appears briefly
in the display.