Bang & Olufsen BeoCom 1 - User Guide - Manual (Page 7)

7
Charge the handset battery, 8
First-time registration of a handset, 8
• Open the base and register the handset
• Name the handset
• Set BeoCom 1 for use with one or two lines
• Set the time and date
Phone feedback – indicator lights, 12
Connect and use a headset, 12
Placement, surroundings, and cleaning, 13
Attach the clip, 13
The handset, 14
• The display
• The keypad
Battery status, 17
Replace the battery, 17
When getting started, follow this
procedure:
1 Connect the charger to the
power outlet as described in the
charger’s Guide;
2 Charge the handset battery;
3 Connect the BeoLine base as
described in the BeoLine Guide;
4 Register the handset to the base.
Do not extend or alter the base or
charger’s power cord in any way, as
this will cause the product in
question to malfunction!
This chapter describes the first-time
setup procedure in detail.
In addition, it describes how to
interpret the indicator light on the
handset, use the handset keys and
navigate using the menu system
and the handset display.
Finally, the chapter contains
information about maintenance of
BeoCom 1 and accessories
available from your Bang & Olufsen
retailer.
Get started