Bang & Olufsen BeoCom 1 - User Guide - Manual (Page 48)

48
>> System use with several handsets
Call another handset
You can call one handset or call all handsets simultaneously. If you
call all handsets, the handset that responds first receives the call. If
you call one handset, the display shows which handset has been
called.
To call a handset…
Press to make an internal call
Press the number of the handset and the call is
made automatically. Alternatively…
…turn the wheel to search through the internal
listing of handsets and press to make the call.
If the internal call can not be made, you will hear
a busy signal
To call all handsets…
Press to make an internal call
Press to call all handsets
To end a call…
Press to end a call
INT
1 – 8
Living room
3
INT
The phone system allows up to one
internal call and two external calls
to take place at the same time.
You can use three different ringing
signals to identify calls on line 1,
calls on line 2, and internal calls.
For further information, refer to the
chapter Preference settings on
page 53.
If you misplace a handset, you may
be able to locate it by making a call
to that handset.
If you have an active call and
another handset elsewhere in the
system is taken off the hook, your
handset emits a single, short beep
to notify you that a third party has
joined the call. This, however, only
happens if the system handsets are
using the same line at the time.