Brandmotion 1009-9517 - Manual (Page 3)

INSTALLATION INSTRUCTIONS
1009-9000-00 3 of 18
9 August 2011
6. Remove the driver’s side sun visor using a
8mm socket. (Figure 5)
Figure 5
7. Remove both bolt covers on the drivers side
A-Pillar using a flat head pocket screwdriver.
Insert the screwdriver into the gap between
the bolt cover and A-Pillar cover. Gently pry
the bolt cover away from the A-Pillar cover
while being careful not to damage the trim.
(Figure 6)
Figure 6
8. Remove A-Pillar bolts with a 10mm socket,
and then remove the A-Pillar cover by
shifting it away from the A-Pillar with your
hands. (Figure 7)
Figure 7
9. Remove the driver’s side end of dash cover
by gently prying it away from the dashboard
using a plastic trim tool. Be careful not to
damage the trim. (Figure 8)
Figure 8