Calculated Industries 5070-B User Guide - Manual (Page 8)

U
ser
'
s
G
Uide
— 7
(cont’d)
 
milli- — Used with Watts, Amps, Volts, and
Volt-Amps keys to identify “milli-” values.

amps — Enters or calculates Amps (using Volts
and VA or Watts).

Volts — Enters or calculates Volts (using
Amps, HPth, and VA or Watts). Default value
is 240 Volts.

Volt-amps — Enters or calculates Volt-Amps
(using Amps, Volts and Horsepower or Watts).

Watts — Enters or calculates Watts (using Amps,
Volts, and VA or Horsepower).
 
Dc amps (idc) — Enters or calculates DC Amps
(using DC Volts and Resistance).
 
Dc Volts (Vdc) — Enters or calculates DC Volts
(using DC Amps and Resistance).
 
Dc resistance (r) — Calculates and displays
DC Resistance in Ohms (using DC Volts and
DC Amps).
 
power Factor (pF%) — Enters or calculates
Power Factor percentage (based on Watts
and VA). Default value is 100%. Entered or
calculated Power Factors greater than 100%
will result in an error.

theoretical Horsepower — Enters or calculates
Theoretical Horsepower (based on Amps, VA,
Watts, Efficiency%, PF%, and/or Volts). 1.0 HPth
correlates to 746 Watts at 100% Efficiency.