Metrohm 848 Titrino plus - Manual (Page 39)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Operation
848 Titrino plus
￭￭￭￭￭￭￭￭ 29
3 Exporting the method
￭ In the function bar, select Export and press [OK].
The method is being exported. The directory structure on the USB
flash drive is listed in chapter 6.5, page 62.
5.5 Control
Menu ▶ Control
In the dialog Control, the settings for the execution of a single determi-
nation or of one sample series are defined.
Sample table
If this parameter is activated, the sample data for a sample series can be
entered in a table (see Chapter 5.7, page 32).
Selection on | off
Default value off
Autostart
If this parameter is activated, a new determination is started automatically
at the end of a determination. This continues until the number specified
has been reached (see Number of autostarts).
Selection on | off
Default value off
Number of autostarts
This parameter is visible only when Autostart = on.
Number of automatic starts.
Input range 1 - 50
Selection table
Default value table
table
The number of automatic starts corresponds to the number of samples
in the sample table.