Metrohm 848 Titrino plus - Manual (Page 70)

6.4 Managing common variables
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
60 ￭￭￭￭￭￭￭￭
848 Titrino plus
Selection on | off
Default value off
Time interval
This parameter is visible only when Monitoring = on.
You will be notified that this time interval (in days) has elapsed when start-
ing a method. You can then select whether or not you would still like to
start the method.
Input range 1 - 999 d
Default value 999 d
6.4 Managing common variables
6.4.1 General
Menu ▶ System ▶ Common variables
The instrument offers the possibility of saving five method-independent
variables, so-called common variables. These variables remain saved in
the instrument and can be used in future calculations. Common variables
are useful, e.g. for the following applications:
￭ Determination of a blank value which will be taken into account during
the content determination of the sample.
￭ Determination of the content of a standard solution, which will be
taken into account during the content determination of the sample.
The common variables have the non-changeable designation CV01…
CV05. The value is displayed for every variable. No unit can be assigned
to the common variables.
Edit
See the following chapter for editing the data of the selected common
variable.
Delete
Set the selected common variable to invalid.