Metrohm 848 Titrino plus - Manual (Page 58)

5.13 Manual Control
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
48 ￭￭￭￭￭￭￭￭
848 Titrino plus
2 Select the dosing function
￭ Select the Dosing item.
￭ In the function bar, select ADD and press [OK].
3 Configure the dosing function
Note
￭ The dosing and filling rate should be decreased for viscous liq-
uids.
￭ The maximum dosing and filling rate depends on the cylinder
volume (see Chapter 10.1.1, page 117) .
￭ Enter the desired volume.
￭ Enter the dosing rate.
￭ Enter the filling rate.
4 Start dosing
￭ Press [START].
The status changes to busy, the dosed volume is displayed. When a
cylinder volume has been added, the dosing cylinder will be refilled
automatically.
5 Fill the cylinder
￭ Press [STOP] or [BACK].
The dosing cylinder is filled. If you start the filling with [BACK], then
the dialog will also be exited.