Metrohm 873 Biodiesel Rancimat Manual - Manual (Page 111)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Operation
873 Biodiesel Rancimat ￭￭￭￭￭￭￭￭ 103
Delta T
Temperature correction: indication of how much the block temperature has
been increased so that the sample reaches the setpoint temperature.
Gas flow
Gas flow through sample.
Use internal pump
Gas supply with internal pump switched on/off.
Start options
Start delay
Waiting time until starting the measurement.
Start mode
Mode for starting the channels:
per channel: all channels were started individually.
per 2 channels: 2 channels each have been started jointly.
per block: the 4 channels of a block were started jointly.
Stop criteria
Time
Time until the automatic stop of the determination.
Conductivity
Conductivity limit value. The determination was automatically ended upon
reaching this value.
Endpoint
Automatic stop of the determination, as soon as every endpoint (induction
and stability time) has been reached.
Actions at end of determinations...
Shut off heater
The heating was automatically deactivated at the end of the determination.
Shut off gas flow
The gas flow was automatically deactivated at the end of the determination.