Metrohm 757 VA Computrace - Manual (Page 118)

5 Determination mode
757 VA Computrace – Software
108
5.6 Sample table
The SAMPLE TABLE window shows the sample data of the loaded
sample table.
Pos. [ 1, 3, 5 ... 127; read only ]
Position of the sample on the sample rack of the
813 Compact Autosampler. Only odd numbers
are displayed, since for every sample a vessel
containing rinsing solution must be placed at the
even sample rack positions.
Sample ID [ 16 characters ; "sample" ]
Identification for sample.
Amount [ > 0 ; 10 ]
Amount of sample added to the measuring ves-
sel.
Unit [ mL, g ; mL ]
Selection of unit for sample amount.
Cell volume (mL) [ > 0 mL ; 10 mL ]
Total volume of solution (sample + auxiliary solu-
tion, e.g. buffer) in the measuring vessel at the
start of the determination. The sample concentra-
tions Mass conc. calculated refer to this
cell volume.