Metrohm 757 VA Computrace - Manual (Page 18)

1 Introduction
757 VA Computrace – Software
8
6. Close the VA Computrace software by clicking on or se-
lecting File / Exit .
7. Switch on the Dosimats connected to the 757 VA Computrace
Stand.
8. Switch on 757 VA Computrace stand.
9. Restart the VA Computrace software.
Note: If Dosimats are connected to the 757 VA Computrace
Stand, the instruments must always be switched on in the se-
quence Dosimat → 757 → PC.
Deinstallation
1. Select <Start> / Settings / Control panel.
2. Double-click the Software icon.
3. Select 757 VA Computrace in the list and click on <Add/remove> .
Select the Remove option and click on <Next> . All program
files and icons should be removed.