Metrohm 896 Professional Detector – Conductivity & Amperometry - Manual (Page 21)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
2.896.0030 896 Professional Detector – Conductivity & Amperometry
￭￭￭￭￭￭￭￭ 13
1 2 3
1 Remove the two covering stoppers.
2 Loosen the two cylinder screws with the 3 mm hexagon key and
remove them.
3 Remove the bottle holder.
Stack other instruments in the required order. Mount the bottle holder
(6.2061.100) onto the topmost instrument on the stack (see "Mounting
the bottle holder", page 13).
Proceed as follows:
Mounting the bottle holder
Before you can mount the bottle holder, the following preconditions must
be met:
￭ The instrument is switched off.
To mount the bottle holder, you need a 3 mm hexagon key (6.2621.100).