Metrohm 896 Professional Detector – Conductivity & Amperometry User Manual
Page 27
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
2.896.0030 896 Professional Detector – Conductivity & Amperometry
￭￭￭￭￭￭￭￭
19
The power supply cable is three-core and provided with a plug with
grounding. If another plug has to be mounted, the yellow/green conduc-
tor (IEC standard) must be connected to the protective ground (protection
class I).
1 Connecting the power supply cable
￭
Plug the power supply cable into the power socket .
￭
Connect the power supply cable to the power supply.
2 Switching on the instrument
Switch on the instrument using the power switch .
After switching on, the LED on the front of the instrument flashes
while a system test is carried out and the connection to the software
is established. Once the system test is complete and the connection
to the software has been established, the LED lights up continuously.