Metrohm tiBase 1.0 Manual - Manual (Page 98)

3.2 Administration ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
90 ￭￭￭￭￭￭￭￭ tiBase 1.0
Message
The message defined here will be transmitted as an E-mail if the maximum
permitted number of incorrect login attempts is exceeded.
The Text editor for entering or changing the message is opened with
or by double-clicking into the text field.
Selection Text (unlimited)
Sender
E-mail address
E-Mail address of the sender.
Input 200 characters
SMTP server
Address of SMTP mail server.
Input 200 characters
Port
Port number of the SMTP mail server.
Range 1 ... 65536
Default value 25
Authentication
on | off (Default value: off)
Check box for activating the authentication of the sender when sending the
E-mail or selection of the authentication method.
Selection SMTP | SMTP after POP
Default value SMTP
POP server
Address of POP mail server.
Input 200 characters
Port
Port number of the POP mail server.
Range 1 ... 65536
Default value 110