Metrohm 850 Professional IC Anion MSM-HC MCS Prep 1 User Manual
Page 31
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
850 Professional IC – Anion MSM-HC – MCS – Prep 1
￭￭￭￭￭￭￭￭
21
3
Tubing olive 6.2744.034
For connecting capillaries to the aspiration
side of the peristaltic pump.
4
Pump tubing 6.1826.320
With yellow/orange stoppers. For fresh
acceptor solution.
5
Pump tubing connection 6.2744.180
With safety device and filter. For connecting
capillaries to the outlet side of the peristaltic
pump.
6
PTFE capillary 6.1803.040
For the transport of the acceptor solution to
the dialysis cell.
7
PVDF pressure screw 6.2744.000
8
PEEK capillary 6.1831.050
For the transport of the acceptor solution
with dialysed sample to the injection valve.
9
Pressure screw 6.2744.014
10 PTFE capillary 6.1803.040
For the transport of the acceptor solution
back to the peristaltic pump.
11 Pump tubing 6.1826.320
With yellow/orange stoppers. For the
acceptor solution.
12 PTFE capillary 6.1803.040
For the transport of the acceptor solution to
the waste container.
13 PTFE capillary 6.1803.040
For the transport of the matrix-loaded sam-
ple to the dialysis cell. Connection to the
peristaltic pump on the Sample Processor
(see manual IC equipment - Dialysis).
14 PTFE capillary 6.1803.040
For the transport of the sample back to the
peristaltic pump on the Sample Processor
(see manual IC equipment - Dialysis).
Ultrafiltration
The following installation diagram shows the connection of the eluent
path with ultrafiltration as inline sample preparation. For this you need the
6.5330.010 IC equipment for ultrafiltration to be ordered separately.
For ultrafiltration, a sample containing disturbing particles is filtered in the
ultrafiltration cell and is carried via the injection valve onto the separation
column. For a detailed description of the ultrafiltration and the complete
installation of the IC equipment for ultrafiltration, see the manual for the
IC equipment for ultrafiltration.