Banner PresencePLUS P4 EDGE 1.3 Series - Manual (Page 160)

Measure Tool Pattern Find/Count Tab
On the Pattern Find tab, use the drop-down list to select either to Measure From the Reference Point or the
Current Point.
The Pattern Count tab shows the location of the Pattern Location used in the measurement. Click Measure
Tool7.4.4 Measure Tool on page 145 for more information about the Measure tool.
Pattern Find and Pattern Count Tabs
P/N 000000 Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
160
7/2009 PresencePLUS Software Tools