Banner PresencePLUS P4 EDGE 1.3 Series - Manual (Page 223)

a new BMP file to the Playback List, click the plus button . This will bring up the Add Image(s)
window allowing you to find the relevant files on your computer.
3. Click the Play button. Once the Playback List is populated with image file(s), the Play button
becomes active. When the Play button is clicked, the Play button becomes to the Pause button
and the images in the Playback List are nspected. Press the square Stop button or the Pause
button to stop.
Other Playback Features
After files have been added to the Playback List, a couple of buttons become active:
• The minus button is used to remove the currently selected bitmap from the list.
• The Clear All Images button is used to erase all of the files on the list.
There are two Playback modes possible:
• Single Play Mode (the default). In this mode, the Player will run through all the files on the Playback
List once and then stop.
• Repeated Play Mode is entered by clicking on the Single Play Mode button. Repeated Play puts
the Player into a continuous loop inspecting the files on the Playback List over and over until the
Stop or Pause buttons are clicked or the mode is changed back to Single Play.
Instead of running through all the files on the Playback List as fast as possible, the Player can be made to step
through each image individually. Clicking on the file name in the list runs the inspection file once on that image.
Using the Forward or Back buttons will allow you to step through the images one at a time.
223 Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
P/N 000000
Run Screen 7/2009