Banner PresencePLUS Pro—PRO Camera - Manual (Page 13)

P/N 68368 rev. B
7 01/04
Installation Manual Hardware Installation
Banner Engineering Corp. • Minneapolis, MN USA
www.bannerengineering.com • Tel: 763.544.3164
Components
The PresencePLUS Pro system consists of a PC with PresencePLUS Pro software installed, a camera, and a
trigger device connected to the controller. An optional video monitor and light source can also be connected to the
controller.
--------------------------------------------------------------------------------
PresencePLUS Pro System Basic Components
PC with PresencePLUS Pro Software
(Required only for configuration and diagnostics)
Controller PPCTL
Light Source
Trigger Device
Camera PPCAM
(Mounting Bracket is optional)
Video Monitor
(optional)
Terminal Block
• Power Supply
• Trigger Input
• Light Source
• Other I/O