Banner PresencePLUS Pro—PRO Camera - Manual (Page 29)

P/N 68368 rev. B
23 01/04
Installation Manual Maintenance
Banner Engineering Corp. • Minneapolis, MN USA
www.bannerengineering.com • Tel: 763.544.3164
Maintenance
Maintenance tasks include keeping the hardware free of dust and dirt and updating the PresencePLUS Pro
software as new versions become available.
------------------------------------------------
Cleaning the Camera and Controller
Regularly remove any dust or dirt from the camera and controller using a soft cloth. If needed, slightly dampen the
cloth with a weak solution of neutral detergent. Avoid getting dirt on the camera’s imager (the area behind the
lens). If the imager is dirty, use anti-static compressed air to blow off the dust.
-----------------------------------------------------------
Cleaning the Camera Lens
Regularly remove dust, dirt, or fingerprints from the lens. Use anti-static compressed air to blow off dust. If
necessary, use a lens cloth and lens cleaner or window cleaner to wipe off remaining debris.
Do not use any other chemicals for cleaning.
-----------------------------------
Updating PresencePLUS Pro Software
The current version of PresencePLUS Pro software is available for download from the Banner website:
www.bannerengineering.com/presencepluspro