Banner PresencePLUS Pro—PRO Camera - Manual (Page 7)

P/N 68368 rev. B
1 01/04
Installation Manual What’s New in This Revision?
Banner Engineering Corp. • Minneapolis, MN USA
www.bannerengineering.com • Tel: 763.544.3164
What’s New in This Revision?
The following list summarizes additions to this revision of the PresencePLUS Pro Installation instructions:
Product Support
Details for finding the controller and camera model numbers and date codes under
Contacting Banner .
Hardware Installation
• Optional light source and triggering device in the
Components list and illustration
• New camera-to-controller Connecting Cables in the system diagram
• New DIN Rail Mounting Option for the controller
• New camera mounting knuckle assembly in Camera Mounting Brackets
• Instructions for providing Cable Bend Relief clearance
• Infrared filters in Installing Lens Filters
Controller Terminal Block
• New
Controller Terminal Block Pin-Out details.
• Leading edge and trailing edge illustration for PNP and NPN modes in Trigger, Pin 3
• RS-232, Pin 5 functionality
• Programmable I/O, Pins 9–14 table updates
• Product Change, Pin 15 list and table updates
• Product Select, Pins 16–19 new input specifications table
Software Installation
Software Installation procedure and screen updates
Startup and Troubleshooting
•
System Startup procedure updates
• New Troubleshooting Error Messages
• New troubleshooting solutions for Camera not connected to controller , Ethernet connection lost , and FTP
communications blocked
Specifications
• CE certification in
Controller Specifications and Camera Specifications
• Recommended PC IP Address in the specifications table
Parts
New parts in the following Parts table sections:
• Lights
• Cables
• Mounting Brackets
• Filters