Banner PresencePLUS P4 Series - Manual (Page 112)

Blob Sort
The Sort drop-down list allows the user to select a sort method to determine which Blob the sensor labels as
"Blob #1." By default, Blobs are numbered according to scan order; that is, the sensor numbers Blobs as it
encounters them while scanning the FOV from top-to-bottom and then left-to-right. Select one of the computed
statistics choices from the drop-down list to use for the sort:
• No sorting
• Position
•
Area 7.3.2.6.2.1 Area on page 116
• Perimeter7.3.2.6.2.3 Perimeter on page 116
• Compactness7.3.2.6.2.4 Compactness on page 117
• Major Axis Length, Minor Axis Length, and Major Axis Angle7.3.2.6.2.5 Major Axis Length, Minor
Axis Length, and Major Axis Angle
on page 117
• Eccentricity7.3.2.6.2.6 Eccentricity on page 119
• Min Radius and Min Radius Position7.3.2.6.2.8 Min Radius and Min Radius Position on page 119
P/N 000000 Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
112
7/2009 PresencePLUS Software Tools