Banner PresencePLUS P4 Series - Manual (Page 136)

Description Value Data Label
1 = Tool overall results passed.
2 = Tool overall results failed.
1 or 0 Success
Tool processing time for the current inspection. ms Execution Time
Fastest recorded tool processing time since the start of the inspection or
since power-up. ms Execution Time Min
Slowest recorded tool processing time since the start of the inspection or
since power-up. ms Execution Time Max
1 = Input 1 results passed.
0 = Input 1 results failed.
1, 0, or -1 Input1
-1 = Input1 results not defined.
1 = Input 2 results passed.
0 = Input 2 results failed.
1, 0, or -1 Input2
-1 = Input2 results not defined.
1 = Input 3 results passed.
0 = Input 3 results failed.
1, 0, or -1 Input3
-1 = Input3 results not defined.
1 = Input 4 results passed.
0 = Input 4 results failed.
1, 0, or -1 Input4
-1 = Input4 results not defined.
1 = Tool overall results passed.
0 = Tool overall results failed.
1 or 0 Output
7.4.2 Math Tool
The Math tool provides basic arithmetic, inequality expressions, and statistical information for PresencePLUS
inspections. In general, the Math tool takes one or more pieces of information from Vision tools and makes
mathematical espressions out of them. The results of the Math tool's analysis are displayed in the Result
windows at the bottom of the screen.
The inputs to the Math tool are called Operands. The Operation is the mathematical expression used to analyze
the Operands.
Fields
The following are fields on the Math tool Input tab:
• Math Tool Modes7.4.2.1 Math Tool Modes on page 137
• Use of Constants7.4.2.2 Use of Constants on page 141
• Results7.4.2.3 Results on page 141
Supported Platforms
P/N 000000 Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
136
7/2009 PresencePLUS Software Tools