Banner PresencePLUS P4 Series - Manual (Page 216)

There are three steps to recording bitmap images using this feature:
1. Choose a Record Path. At the top of the tab, at the end of the line labeled Record Path, click
the button. This will open up the Record to… window allowing you to browse for the folder where
you want the images to be saved.
2. Choose a Record Mode. Right beneath the Record Path selection is the Record Mode drop
down menu. This is where the user selects the conditions (if any) for saving images. The choices
are similar to those for the Logging feature.
P/N 000000 Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
216
7/2009 Run Screen