Banner PresencePLUS P4 Series - Manual (Page 12)

STP25 — 7.6 m (25') DB9P30 — 9 m (30')
*The Sensor can be connected to the PC via a serial cable or an Ethernet network; Ethernet provides faster
communication.
Direction Description Wire Color Pin #
Output RS-232 TX** Yellow 1
Input Remote Teach Gray 2
Input Product Change Orange 3
Input External Trigger Pink 4
In/Out Discrete I/O #1 Black 5
In/Out Discrete I/O #2 Red 6
In/Out Discrete I/O #3 White 7
In/Out Discrete I/O #4 Light Blue 8
Input RS-232 RX** Violet 9
Output RS-232 Signal Ground** Green 10
Input Common (Signal Ground) Blue 11
Input 10-30V dc Brown 12
** These three wires make up the RS-232 serial connection.
Note: All unused inputs and outputs should be connected to ground if configured as PNP, and
connected to +24V dc if configured as NPN. Serial input pins should be connected to ground.
2.2 Software Overview
The PresencePLUS application window is shown below.
P/N 000000 Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
12
7/2009 System Description