E-flite Extra 260 3D Profile - Manual (Page 13)

 2. Locate the wing and slide it into the vertical
fuselage underneath the horizontal fuselage.
Use care not to damage either the vertical or
horizontal fuselage pieces.
Hint:.Fold.one.of.the.ailerons.up.and.onto..
the.wing.to.make.it.a.little.narrower.to.install.
into.the.fuselage..Push.the.wing.past.center.to.
move.the.aileron.back.into.position,.then.center.
the.wing.
 3. Slide the horizontal stabilizer into the fuselage,
being careful not to damage any of the alignment
tabs. You may need to move the horizontal
fuselage out of the vertical fuselage slightly to get
the stabilizer into position.
13