E-flite Extra 260 3D Profile - Manual (Page 17)

Installing the Bracing
Required Parts
Assembled airframe
Carbon rod, 9
7 /
8
" (250mm) (2)
Carbon rod, 9 1 /
2
" (240mm) (2)
Carbon rod, 4 3 /
4
" (120mm) (2)
Carbon rod, 4 1
/
2
" (113mm) (4)
Carbon rod, 4 1
/
8
" (105mm) (4)
Required Tools and Adhesives
Foam-safe CA, Medium
Sandpaper
Hobby knife
Note:.It.is.important.that.each.carbon..
rod.attaches.to.the.next,.and.to.the..
carbon.blade.spars.on.the.edges.of.the..
foam..This.is.necessary.to.provide.the..
stiffest.airframe.possible.
 1. Locate the two 4 3 /
4
" (120mm) carbon rods.
Pass the rods through the fin and stabilizer.
Use foam-safe CA to glue the rods to the fin
ONLY at this time.
17