E-flite Extra 260 3D Profile - Manual (Page 35)

Landing Gear Installation
Required Parts
Airframe
Landing gear strut (2)
Wheel retainer (4)
Wheel pant (2)
1
1 /
2
" (38mm) foam wheel (2)
Landing gear support disk (2)
Required Tools and Adhesives
Foam-safe CA
The.landing.gear.is.optional..If.you.plan.
on.saving.weight,.or.flying.from.very.rough.
surfaces,.it.is.suggested.to.skip.this.section.
  1. Locate the landing gear strut, two wheel
retainers and the wheel. Use foam-safe CA
to install the wheel retainer onto the strut. The
retainers will sandwich the wheel in position.
Note:.Use.care.not.to.get.CA.on.the.wheel,.
preventing.it.from.rotating.on.the.strut.
35