E-flite Extra 260 3D Profile - Manual (Page 19)

 4. Locate two of the 4 1 /
8
" (105mm) carbon rods.
Install these rods, like the rods installed in Step
3, to the horizontal fuselage. Again, there are
notches for the carbon rods. Make sure the rods
are touching the previously installed rods and the
pre-installed carbon blade spars on the edges of
the foam.
 5. The next rod to install is the 4 1 /
2
" (113mm)
rod from the rod in Step 4 to the bottom of
the vertical fuselage.
19