E-flite Extra 260 3D Profile - Manual (Page 33)

 9. Solder any necessary connectors to your
speed control. Plug the speed control into the
throttle channel of the receiver and to the motor.
Use hook and loop to secure the speed control
to the fuselage.
Note:.It.is.suggested.to.secure.the.motor.wires.
to.the.fuselage.to.prevent.them.from.coming.
in.contact.with.the.propeller.or.servos.when.
performing.extreme.maneuvers.
 10. Attach the battery under the wing using
hook and loop material. The location shown is
an approximate location and can be repositioned
as necessary to achieve the correct balance for
your Extra.
33