E-flite Extra 260 3D Profile - Manual (Page 22)

Radio Installation
Required Parts
Airframe
Servos (4)
Micro control connector (4)
Control connector backplate (4)
Micro control horn (4)
Control horn backplate (4)
2mm x 4mm screw (4)
Aileron pushrods, 4
1
/
2
" (115mm) (2)
Rudder pushrod, 12" (305mm)
Elevator pushrod, 12
1
/
2
" (320mm)
Hook and loop material
Required Tools and Adhesives
Foam-safe CA, Medium
Low-temperature hot glue
Drill bit: 1/16" (1.5mm)
Screwdriver, #0 Phillips
 1. Install the micro control horn on the aileron using
the control horn backplate. Use a couple drops of
foam-safe CA to keep the backplate in position.