HCO MB600 - Manual (Page 20)

Page | 19
Note: Normal quality is good for general purpose, high quality will increase the data size
of sending picture which will result in longer sending time and more power consumption.
H. Camera Name:
User can input a camera name in the form of 4 digits; the camera name will be shown on
the right corner of time stamp of each picture taken.
Note: only 4 digits (0~9) are allowed, DO NOT use Space between digits.
I. PATH
Save the edited "UWAYTOOL.exe" after completing all information above to a location
you can easily find on your compture. Click the "Save" button and a file named
"SETUP.bin" will be generated in the designated location. Copy the "SETUP.bin" file onto
the ROOT directory of a SD card (not in DCIM) and insert the SD card into the camera.
NOTE: Switch the camera to "SETUP" and after a few seconds, the camera will display
"Update Success".
Testing
the network using“manually send mode”:
1. Switch camera to "SETUP"
2. After the camera boots up into Live Preview, it will search for the network if a SIM
card is inserted and the cellular module is NOT turned Off in "Send Mode". The
user will see "Searching network....." on the screen. Once the camera is connected
to the network, the ISP name will show on the bottom right corner of the screen. If
the connection fails, it will show "Login fail". Press the "Right" key to search for
network again.
Note: continuously Login fail generally means the network signal is poor or the SIM card
is not compatible.
3. While in Live Preview, press 'Down' arrow to switch to Playback mode, choose a
picture using the "Right" or "Left" arrows and press OK.The camera will send the
selected picture to the preset phone number(s) and email address(s). After sending
successfully, the LCD screen will
show„Send over‟. If reception is poor or network is
busy, it will show „Send Fail‟.