HCO MB600 User Manual
Page 23
Page | 22
iv.
Make sure you follow carefully the Download Tool instructions or menu on the
camera in setting up the network.
4.
The camera shows full or partial reception bars and I get login failure or no
pictures transmitted
i.
Although the camera may show full or partial cellular power, the network may be
busy at the time of transmission and login; keep trying or move to another
location.
ii.
In some instances the camera may show good reception but the cellular
bandwidth is too small to transmit pictures at that time; trying at a later time or
moving to a different location may help.
5.
The camera does not turn ON
i.
Ensure batteries are inserted properly with correct polarity and fully charged. If
possible test each battery with battery tester. Approximately 1.7V for Lithium and
1.3V for NiMH is full power.
ii.
Ensure SD card is properly inserted and not in locked position
iii.
Reset camera by removing batteries and SD card for 10 minutes
iv.
Cold temperature may decrease battery output sufficiently to prevent camera
from turning ON; check batteries and ensure they are rated for cold temperature
6.
Beeping Noise when camera turns ON
i.
Insert SD card
ii.
Ensure SD card is not locked
iii.
Format SD card in camera
iv.
SD card may not be compatible
7.
Camera will not take pictures or stops part way even with full batteries
i.
SD card is not formatted correctly; format SD card in camera
ii.
Ensure SD card is not locked
iii.
SD card is faulty or incompatible; try different SD card and/or brand. Faulty or
incompatible SD cards may cause system conflict, system crash, and battery
drain. Always format SD card in camera and try different SD cards if problem
persists.
iv.
Batteries do not have enough power to activate picture/video sequence
8.
Batteries run down quickly
i.
Avoid poor quality alkaline and rechargeable batteries, avoid mixing different
brands and ages of batteries as battery life will be adversely affected. Different
brands of batteries will perform differently than others; try other battery brands to
find what works best for your environment.