HCO MB600 User Manual
Page 7
Page | 6
I. CAMERA SETTINGS MENU
CAMERA MODE
This camera can be set to capture still pictures OR video.
1. Select CAMERA MODE
2. Select Capture Image for PHOTO mode, Video Record for VIDEO mode, or
Playback using UP or DOWN arrow and push OK to set
PHOTO RESOLUTION
Photo resolution can be set at (4:3): 8MP, 5MP or 3MP or (16:9): 6MP, 4MP, or 2MP
1. Select PHOTO RESOLUTION
2. Select desired photo resolution and push OK to set
PHOTO BURST
This feature allows the camera to take from 1-5 photos in rapid succession following each
trigger.
1. Select PHOTO BURST
2. Push OK
3. Select desired number of photos per trigger and push OK to set
VIDEO RESOLUTION
Video mode includes High Definition HD 1280 x 720 or VGA 640 x 480.
1.
Select VIDEO RESOLUTION
2.
Select HD or VGA mode and push OK to set
VIDEO LENGTH
Video length can be set in 1 sec increments from (5s
– 30s). Longer video lengths will
deplete battery power and memory more quickly than lower lengths.
1. Select VIDEO LENGTH
2. Select desired video length and push OK to set
VIDEO SOUND
Video sound recording can be turned ON or OFF.
1. Select VIDEO SOUND
2. Select ON or OFF and push OK to set
QUIET TIME
Also known as, “Time Interval or Delay Time”, this feature puts the camera to sleep after
capturing an image for the selected period of time before it can be re-activated by motion.
Times vary from 5 seconds to 60 minutes.