HCO MB600 - Manual (Page 26)

Page | 25
ii. Cold temperature will reduce battery output to IR lights.
iii. Remove brush, grass, and other debris that may prevent IR light from reaching
its potential.
19. Too many empty pictures/video or false triggers
i. Ensure camera is mounted on a solid surface; trees and surface may move in
wind causing camera to trigger falsely.
ii. Adjust camera height and angle.
iii. Remove brush and branches from detection zone that may be triggering camera.
iv. A close running animal/human may make it across detection zone before
triggering the camera
v. Sunlight and heat waves may result in certain scenarios of false triggers; position
camera in different location.
SPECIFICATIONS

HSPA+ / GSM Cellular Module

MMS resolution: 640 x 480 and 800 x 600

Lens: FOV = 52

Photo resolution: (4:3) 8MP, 5MP, 3MP or (16:9) 6MP, 4MP, 2MP (programmable)

Photo burst: 1-5 photos per trigger (programmable)

Video resolution: HD 1280 x 720 or 640 x 480 VGA

Video length: 5-60 sec

Very compact (4 x 5.9 x 2.2 inches)

Fast trigger time (<1 sec)

60 No Glow Black Flash infrared LEDs

Multi-zone PIR detection range: up to 50 feet

Color daytime and black & white nighttime pictures

Date, Time, Temperature & Moon Phase image stamp

Low power consumption, standby battery lifetime up to 12 months

External memory : SD/SDHC card up to 32 GB

Video sound recording

6V / 9V-volt port & USB port

12 x 1.5 volt AA batteries (not included)

Low battery indicator

Mount with mounting strap, security box, & cable lock