HCO MB600 - Manual (Page 9)

Page | 8
NOTE: When in cellular mode, it is important to understand the cellular limitations. For
example, it may not be a good idea to set time-lapse interval to short as you will
maximize the daily limit quickly. Furthermore, setting a time-lapse interval will require
taking into consideration the cellular transmission speed.
1. Select TIME LAPSE
2. Select ENABLE to set up time lapse or DISABLE to cancel time lapse
3. Set START TIME and push OK to set
4. Set END TIME and push OK to set
5. Set DELAY TIME and push OK to set
6. Push LEFT arrow button to return to menu
II. ADDITIONAL SETTINGS
LANGUAGE
Select your desired language
DATE / TIME STAMP
This allows the user to have the date, time, and temperature stamped onto each photo or
video.
1. Select TIME STAMP
2. Select NO or YES and push OK to set
SET DATE / TIME
This feature allows the user to set the display format for date and time, as well as set the
current date and time.
1. Select SET DATE / TIME
2. Select one of the three menu options:
3. Push LEFT arrow button to return to menu when finished
DATE FORMAT

Select the desired Date Format and push OK to set
TIME FORMAT

Select desired Time Format and push OK to set
SET DATE / TIME

Set date and time using UP, DOWN, RIGHT and LEFT arrow and push OK to set
TEMPERATURE
Allows the user to select either Fahrenheit or Celsius temperature settings.