Soleus GPS Pulse (SG008) - Manual - Manual (Page 10)

Soleus GPS Pulse
v The watch will take Auto Lap based on the Distance set in Auto Lap setting.
6.1.3. How to change views in RUN mode:
• Press S5 while CHRONO is running to change the information displayed in Line1:
Note:
• Information displayed in Lines 2 and 3 can be changed in SET mode/ VIEW.
• The watch will remember your previous screen view the next time you come back
to RUN mode.
6.1.4. How to view your current data before saving while the chronograph is stopped.
Following are the information as you press S5:
6.2) Using Chronograph mode:
RUN mode & CHRONO mode has the same chronograph counter. When the chronograph is
started or stopped in RUN mode, the same thing happens in CHRONO mode.
6.2.1) How to enter CHRONO mode:
• Press S7 from Time mode to go to CHRONO mode.
The watch will prompt you to GPS GO (if Satellite signal already received) or
INDOOR (if no signal received)