Soleus GPS Pulse (SG008) - Manual - Manual (Page 13)

Soleus GPS Pulse
v The watch will take Auto Lap based on the Distance set in Auto Lap setting.
6.3.3. How to change views in TIMER mode:
•
Press S5 while CHRONO is running to change the information displayed in Line 2.
6.3.4. How to view your current data before saving while the chronograph is stopped.
Following are the information as you press S5:
6.3.5. How to set the Timer after the data is saved or reset.
• While in GPS GO or INDOOR screen or in any Timer screen, press and hold
S11 until SG 1 (segment 1) blinks.
• Press S5 to set the hour, minute and second.
• Press S7 to set the Timer alert then press S1/S11 to turn ON or OFF.
• Press S5/S7 to exit Timer setting.
6.4) Using HRM mode: