Soleus GPS Pulse (SG008) - Manual User Manual
Page 4
Soleus GPS Pulse
How to set USER details:
•
Press S5 while USER is blinking. MALE will start to blink.
•
Press S1/S11 to change the gender.
•
Press S5 to confirm and set the AGE. Age digits will start to blink.
•
Press S1/S11 to change the age digits.
•
Press S5 to confirm and set the WEIGHT. Weight digits will start to blink.
•
Press S1/S11 to change the weight digits.
•
Press S5 to confirm and set the HEIGHT. Height digits will start to blink.
•
Press S1/S11 to change the height digits.
•
Press S5 to confirm and go back to USER setting screen.
•
Press S7 to exit
How to set the HRM:
•
Press S5 while HRM is blinking. ZONE 1 will start to blink.
•
Press S1/S11 to change the zone. There are 3 preset zones
•
Press S5 and the watch will display the LOWER limits of the selected zone. LOW limit
digit will start to blink.
•
Press S1/S11 to change the low limit value.
•
Press S5 to confirm. High limit digit will start to blink.
•
Press S1/S11 to change the high limit value.
•
Press S5 to confirm. The watch will display ZONE ALERT ON or OFF.
•
Press S1/S11 to change ON to OFF or vice versa
•
Press S5 to confirm and the watch will go back to HRM setting screen.
How to set the NIGHT mode function:
•
Press S5 while NIGHT is blinking. The watch will display 10 seconds blinking.
•
Press S1/S5 to change to 20 sec or NIGHT ON.
•
While on 10 SEC or 20 SEC setting, Press S5 to accept the setting and go back to
NIGHT setting screen.
•
While on NIGHT ON setting screen Press S5 to accept the ON setting. The watch will
display the START TIME.
•
Press S1/S11 to toggle between START TIME and END TIME.
•
Press S5 or 3 seconds auto to set the START TIME. Hour digit will start to blink.
•
Press S1/S11 to change the hour setting.
•
Press S5 to change the MINUTE. Minute digits will start to blink.
•
Press S1/S11 to change the minute setting.
•
Press S5 to go back to START TIME setting screen.
•
Press S1/S11 to set the END TIME. Hour digit will start to blink.
Note: Follow the procedure in setting the START TIME.
•
Press S7 to exit to NIGHT ON setting screen.