Soleus GPS Pulse (SG008) - Manual - Manual (Page 6)

Soleus GPS Pulse
How to set the TIMER:
• Press S5 while TIMER is blinking. The segment number will start to blink.
• Press S1/S11 to change the segment number
• Press S5 to set the HOUR. The hour digit starts to blink.
• Press S1/S11 to change the digits
• Press S5 to set the MINUTE. The minute digit starts to blink.
• Press S1/S11 to change the digits
• Press S5 to set the SECONDS. The second digit starts to blink.
• Press S1/S11 to zero the digits.
• Press S7 to set the Timer alert then press S1/S11 to turn ON or OFF.
• Press S5/S7exit to TIMER setting screen
How to set the VIEW
• Press S5 while VIEW is flashing. CHRONO will start to flash.
• While “CHRONO” is flashing, press S1/S11 to scroll the various parameters to set. The
parameters are CHRONO, DISTANCE, PACE, SPEED, HRM, CALORIE and CLOCK.
You can select what information to display in Line 2 & Line 3 for RUN mode
3.2) TIME, NIGHT, CONTRAST and ALERT, can also be set in TIME quick SET mode.
• Press and hold S11 while in Time mode. TIME will start to blink.
• Press S1/S11 to toggle through TIME, NIGHT, CONTRAST and CHIME.
3.3) AUTO LAP, UNITS, USER, and VIEW can also be set in RUN quick SET mode.
• Press and hold S11 until AUTO LAP blinks.
• Press S1/S11 to toggle through between AUTO LAP, UNIT, USER and VIEW.
3.4) TIMER can also be set in TIMER SET mode
• Press and hold S11 until SG 1 (segment 1) blinks.
• Press S5 to set the hour, minute and second.
• Press S7 to set the Timer alert then press S1/S11 to turn ON or OFF.