Soleus GPS Pulse (SG008) - Manual - Manual (Page 11)

Soleus GPS Pulse
6.2.2) How to START, take LAP, STOP, and SAVE:
• Press S1 to start or re-start.
• Press S11to take LAP. If auto lap function is set, the watch will take lap automatically
based on auto lap setting and there is a beep sound during taking of auto lap.
• Press S1 to stop after completing your run.
• Press and hold S1 or press S11 to save your data.
v The watch will take Auto Lap based on the Distance set in Auto Lap setting.
6.2.3) How to change views in CHRONO mode
• Press S5 while CHRONO is running to change the information displayed in Line2:
v The watch will remember your previous screen the next time you come back to CHRONO
mode.
6.2.4) How to view your current data before saving while the chronograph is stopped.
Following are the information as you press S5: