Soleus GPS Pulse (SG008) - Manual User Manual
Page 14
Soleus GPS Pulse
6.4.1. How to enter HRM mode.
• Press S7 from Time to go to HRM mode.
The watch will prompt you to GPS GO (if Satellite signal already received) or
INDOOR (if no signal received).
6.4.2. How to change views in HRM mode:
• Press S5 while CHRONO is running to change the information displayed in Line 2.
6.4.3. How to START, take LAP, STOP, and SAVE:
• Press S1 to start or re-start.
• Press S11to take LAP. If auto lap function is set, the watch will take lap automatically
based on auto lap setting and there is a beep sound during taking of auto lap.
• Press S1 to stop after completing your run.
• Press and hold S1 or
press S11
to save your data.
v
The watch will take Auto Lap based on the Distance set in Auto Lap setting.
6.4.4. How to view your current data before saving while the chronograph is stopped.
Following are the views as you press S5: