2 status, 1 system – SONIQ CWR150NS User Manual
Page 13
- 12 -
If you log in as a common user, you can check the status of the router, but can not
configure the most of the settings.
Note:
In the Web configuration page, you can click Apply Changes to save the
settings temporarily. If you want to save the settings of this page permanently,
click save of Attention that appears at the bottom of the Web page after the
configuration.
3.2 Status
In the navigation bar, choose Status. In the Status page that is displayed contains:
System, LAN, WLAN, WAN, Port Mapping, Statistics and ARP Table.
3.2.1 System
Choose Status > System. The page that is displayed shows the current status and
some basic settings of the router, such as software version, DSP version, uptime,
upstream speed and downstream speed.