2 routing – SONIQ CWR150NS User Manual
Page 71
Advertising
- 70 -
The following table describes the parameters and button of this page:
Field
Description
Aging Time
If the host is idle for 300 seconds (default value), its
entry is deleted from the bridge table.
802.1d Spanning
Tree
You can select Disable or Enable.
Select Enable to provide path redundancy while
preventing undesirable loops in your network.
Show MACs
Click it to show a list of the learned MAC addresses
for the bridge.
Click Show MACs, the page shown in the following figure appears. This table
shows a list of learned MAC addresses for this bridge.
3.6.2 Routing
Choose Advance > Routing, the page shown in the following figure appears. The
page that is displayed contains Static Route and RIP.
Advertising