SONIQ CWR150NS - Manual (Page 22)

- 21 -
After setting, click Next, the page as shown in the following figure appears.
The following table describes the parameters in this page:
Field Description
PPP Username
Enter the username for PPPoE dial-up, which is
provided by your ISP.
PPP Password
Enter the password for PPPoE dial-up, which is
provided by your ISP.
PPP Connection
Type
You can select Continuous, Connect on
Demand, or Manual.
Continuous: After dial-up is successful,
PPPoE connection is always on-line, no matter
whether the data is being transmitted or not.
It is recommended to select it.
Connect on Demand: After dial-up is
successful, within the preset idle time, no data is
being transmitted, the router automatically
disconnects the PPPoE connection.
In this case, you need to enter the idle time.
Manual: Select it, you need to dial up and
disconnect the connection mannually.