SONIQ CWR150NS - Manual (Page 29)

- 28 -
The following table describes the parameters of this page:
Field Description
IP Address
Enter the IP address of LAN interface. It is
recommended to use an address from a block that
is reserved for private use. This address block is
192.168.1.1- 192.168.255.254.
Subnet Mask
Enter the subnet mask of LAN interface. The range
of subnet mask is from
255.255.0.0-255.255.255.254.
Secondary IP
Select it to enable the secondary LAN IP address.
The two LAN IP addresses must be in the different
network.
LAN Port
You can choose the LAN interface you want to
configure.
Link Speed/Duplex
Mode You can select the following modes from the
drop-downlist:100Mbps/FullDuplex,100Mbps/Half