8 diagnostic, 1 ping – SONIQ CWR150NS User Manual
Page 87
- 86 -
The following table describes the parameters of this page:
Field
Description
System Time
Set the system time manually.
NTP Configuration
State
Select enable or disable NTP function. You need
to enable NTP if you want to configure the
parameters of NTP.
Primary Server
Set the primary NTP server manually.
Secondary Server
Set the secondary NTP server manually.
Time Zone
Choose the time zone in which area you are from
the drop down list.
3.8 Diagnostic
In the navigation bar, click Diagnostic. The Diagnostic page that is displayed
contains Ping, ATM Loopback, ADSL and Diagnostic Test.
3.8.1 Ping
Choose Diagnostic > Ping. The page shown in the following figure appears.
The following table describes the parameter and button of this page:
Field
Description
Host
Enter the valid IP address or domain name.
Run Ping
Click it to start to Ping.