SONIQ CWR150NS - Manual (Page 47)

- 46 -
Field Description
Key Format
If you choose 64-bit, you can choose ASCII (5
characters) or Hex (10 characters).
If you choose 128-bit, you can choose ASCII
(13 characters) or Hex (26 characters).
Default Tx Key
Choose the index of WEP Key. You can choose Key
1, Key 2, Key 3, or Key 4.
Encryption Key 1
to 4
The Encryption keys are used to encrypt the data.
Both the modem and wireless stations must use the
same encryption key for data transmission.
If you choose 64-bit and ASCII (5 characters),
enter any 5 ASCII characters.
If you choose 64-bit and Hex (10 characters),
enter any 10 hexadecimal characters.
If you choose 128-bit and ASCII (13
characters), enter any 13 ASCII characters.
If you choose 128-bit and Hex (26 characters),
enter any 26 hexadecimal characters.
Apply Changes
Click it to apply the settings temporarily. If you want
to save the settings of this page permanently, click
Save in the lower left corner.
3.4.3.3 Access Control
Choose WLAN > Access Control and the following page appears. In this page,
you can configure the access control of the wireless clients.