SONIQ CWR150NS User Manual
Page 35
- 34 -
The following table describes the parameters and buttons of this page:
Field
Description
DHCP Mode
If set to DHCP Relay, the router acts a surrogate
DHCP Server and relays the DHCP requests and
reponses between the remote server and the client.
Relay Server
Enter the DHCP server address provided by your ISP.
Apply Changes
Click it to save the settings of this page.
Reset
Click it to refresh this page.
3.4.1.3 DHCP Static IP
Click DHCP Static IP in the left pane, the page shown in the following figure
appears. You can assign the IP addresses on the LAN to the specific individual
PCs based on their MAC address.
The following table describes the parameters and buttons of this page:
Field
Description
IP Address
Enter the specified IP address in the IP pool
range, which is assigned to the host.
MAC Address
Enter the MAC address of a host on the LAN.
Add
After entering the IP address and MAC address,
click it. A row will be added in the DHCP Static IP