SONIQ CWR150NS User Manual
Page 44
- 43 -
Field
Description
channels (for your region) and you should use a
different channel from an adjacent AP to reduce
the interference. Interference and degrading
performance occurs when radio signal from
different APs overlap.
Choose a channel from the drop-down list box.
Radio Power
You can choose the transmission power of the
radio signal. The default one is 100%. It is
recommended to choose the default value100%.
Show Active Clients
Click it to view the information of the wireless
clients that are connected to the modem.
Apply Changes
Click it to apply the settings temporarily. If you
want to save the settings of this page
permanently, click Save in the lower left corner.
3.4.3.2 Security
Choose Wireless > Security and the following page appears.