SONIQ CWR150NS - Manual (Page 51)

- 50 -
Field Description
Apply Changes
Click it to apply the settings temporarily. If you want
to save the settings of this page permanently, click
Save in the lower left corner.
3.4.3.5 WPS
Choose WLAN > WPS and the following page appears.
There are two ways for the wireless client to establish the connection with the
modem through WPS. The modem generates PIN, see the above figure. Click
Regenerate PIN to generate a new PIN, and then click Start PBC, In the wireless
client tool, enter the PIN which is generated by the modem，start connection. The
client will automatically establish the connection with the modem through the
encryption mode, and you need not to enter the key. The other way is the wireless
client generates PIN. In the above figure, enter PIN of the wireless client in the
Client PIN Number field, then click Start PIN to establish the connection.